Not what you need? Contact us
- Machined Aluminum Portento Audio Splitter
- OFC 25AWG pure copper conductors
Machined Aluminum Portento Audio Splitter (3 grams weigth) 26 AWg silver plated conductorsRead the review by Dirk Sommer about the Incanto cable for Audeze (only in german language) appeared the 11/9/2015 on HiFiStatement.net
Silver Plated Conductors 90 ohm Impedence Gold Plated Connectors
Neutrik NC4FXX-B XLR 4 PIN Connector Beryllium copper banana For connecting low/medium impedance headphones directly to the binding posts of an integrated amplifier.
XLR connector 4 PIN Neutrik NC4FXX-BNot what you need? Contact us
Copper Conductors Gold Plated Connectors
Neutrik NC4FXX-B XLR 4 PIN Connector select: Neutrik NP3X-B 6,3mm jack connector Viablue T6s 3,5mm minijack connector
- 5mm² OFC copper conductors
- Triple shielding
- Overall Diameter 15mm
- High Quality gold plated Schuko and IEC plugs
- Offerta/Sale!
Schuko power plug
The basic material is deoxidized phosphor bronze (1.4mm thick) for strength and secure contact. Surface is thoroughly polished twice. The plating of the P-046/C-046 is a combination of 24k gold and palladium which were selected as a result of repeated listening tests. The inner gold layer is 1.5 microns thick and the outer palladium layer is 0.3 microns thick. 100% Made in Japan - Offerta/Sale!
IEC power plug
The contacts of P-004/C-004 are heat treated to insure electromechanical integrity. The 1.0mm thick and 6.0mm wide contacts provide maximum contact area. Concerning the plating, the inner platinum layer is 0.5 microns thick and the outer palladium layer is 0.3 microns thick. 100% Made in Japan - Offerta/Sale!
IEC power plug
The Oyaide C-079 is made from super thick (0.2micron) 24K GOLD plating directly on polished surface of receptacle and blade. Polishing process again (twice) on the 24K GOLD plated surface. Construction method is alike except direct 24k extra thick plating on polished receptacles and blades.100% Made in Japan 
Silver Plated Conductors 90 ohm Impedence Gold Plated Connectors
4.0mm² Conductors. Aluminum Portento Audio Splitters & Shells. Banana and/or spades. Monowiring.- Offerta/Sale!Non disponibile/Not available
Inlet: 1x IEC C14 Outlets: 6 Original SWD-XXX-E (24K gold + Palladium plating) Internal wiring for AC mains: 2.0mm 4N OFC copper solid wire 1,6 mmStainless steel chassis V/A: 250V 10A AC Chassis Dimensions 460 x 75 x 53mm Silver colour Weight 2,7 Kg 
- Aluminum Portento Audio Splitter with 4 pin integrated connector
- OFC 25AWG pure copper conductors
Not what you need? Contact us
XLR 4 PIN Neutrik NC4MXX-B ConnectorNot what you need? Contact us- Offerta/Sale!
Schuko power plug
The Oyaide P-079e is made from super thick (0.2micron) 24K GOLD plating directly on polished surface of receptacle and blade. Polishing process again (twice) on the 24K GOLD plated surface. Construction method is alike except direct 24k extra thick plating on polished receptacles and blades.100% Made in Japan - Non disponibile/Not available
Parallel Portento Audiophile Filter (PAF). EMI/RFI Filter. 1:1 decoupling 450 VA encapsulated toroidal transformer. VIMAR universal outlet. Potted circuit board to prevent microphonic effects. 
- 4mm² OFC copper conductors
- AIST proprietary shielding technology
- Amagnetic aluminum proprietary shells
- High Quality gold plated Schuko and IEC plugs
XLR 4 PIN Neutrik NC4MXX-B ConnectorNot what you need? Contact us
Parallel Portento Audiophile Filter (PAF). Potted circuit board to prevent microphonic effects. Incapsulated in a Delrin cylinder with Schuko connector for a Plug & Play use. Compact dimensions.Download the review appeared on Suono no. 551 February 2021
- Low mass RCA connectors, tellurium copper for central pin, beryllium copper for the ground, amagnetic alluminum barrels
- Single ended directional OFC copper cable
- The entry level solution for every Hi-End system.
- Price for a pair
Machined Aluminum Portento Audio Splitter6N 24AWG pure copper conductors- Offerta/Sale!Non disponibile/Not available
Schuko power plug
The basic material is pure brass for P-029/C-029. Its rigidty makes the contact secure. The blade of P-029 would often be oxidized because of its material, pure brass. When it happens, you need to polish it out frequently by cotton cloth. 100% Made in Japan - Offerta/Sale!
IEC power plug
The basic material is deoxidized phosphor bronze (1.4mm thick) for strength and secure contact. Surface is thoroughly polished twice. The plating of the P-046/C-046 is a combination of 24k gold and palladium which were selected as a result of repeated listening tests. The inner gold layer is 1.5 microns thick and the outer palladium layer is 0.3 microns thick. 100% Made in Japan - Non disponibile/Not available
Parallel Portento Audiophile Filter (PAF). Potted circuit board to prevent microphonic effects. 
110 ohm Impedance Gold plated XLR Neutrik connectors
75 ohm Impedance Available with Portento Audio RCA connectors and/or Neutrik® BNC connectors.
Copper Conductors Gold Plated Connectors
Set of 4 speakers jumpers. 4.0mm² conductors. Gold plated beryllium copper connectors- Non disponibile/Not available
Low capacity (14 pf/ft) balanced cable in 6N copper. The right solution for every hi-end system.Additional meters +35% - Non disponibile/Not available
Low capacity (14 pf/ft) balanced cable in 6N copper. The right solution for every hi-end system.Additional meters +35% 
New!
Neutrik Gold Plated Connectors For connecting headphones with a 4 pin XLR cable with a twin XLR 3 pin balanced output.
New!
- Stable and linear transmission: eliminates electrical interference for a clear, crisp sound.
- Advanced shielding: blocks external noise and preserves signal integrity.
- Premium materials: high-purity OFC copper for superior conductivity, gold plated copper contacts.
- Compatible with high-quality Hi-Fi linear power supplies.
New!
Neutrik NC4FXX-B XLR 4 PIN Connector Beryllium copper banana For connecting low/medium impedance headphones directly to the binding posts of an integrated amplifier.
New!
- Proprietary low-mass RCA connectors with tellurium copper for the center pin and beryllium copper for the ground, non-magnetic aluminum shell
- Individually shielded conductors in 6N OFC copper
- Lightweight and flexible
- Integrated ground wire
- Low capacitance (100pF/m)
- Length: 125cm
New!
- Low mass RCA connectors, tellurium copper for central pin, beryllium copper for the ground, amagnetic alluminum barrels
- Gold plated Neutrik connectors.
- OFC copper cable
- Passive balancing transformer
- Aluminum case
- Price for a pair
New!
- Low mass RCA connectors, tellurium copper for central pin, beryllium copper for the ground, amagnetic alluminum barrels
- Gold plated Neutrik connectors.
- OFC copper cable
- Passive unbalancing transformer
- Aluminum case
- Price for a pair
New!
- Proprietary low-mass RCA connectors with tellurium copper for the center pin and beryllium copper for the ground, non-magnetic aluminum shell
- Gold plated 24k DIN connector teflon insulated
- Individually shielded conductors in OFC copper
- Lightweight and flexible
- Integrated ground wire
- Low capacitance (100pF/m)
- Length: 125cm
New!
- Proprietary low-mass RCA connectors with tellurium copper for the center pin and beryllium copper for the ground, non-magnetic aluminum shell
- Individually shielded conductors in OFC copper
- Lightweight and flexible
- Integrated ground wire
- Low capacitance (100pF/m)
- Length: 125cm
New!
- Low mass RCA connectors, tellurium copper for central pin, beryllium copper for the ground, amagnetic alluminum barrels
- OFC copper cable
- Passive unbalancing transformer
- Gold plated Neutrik panel mount connectors.
- Aluminum case
- Price for a pair
Manufactured in Bronze – Steel – Aluminum Super -rigid coupling with high mass, about 32Kg Floor Stand for a rigid coupling. Dimensions W 550mm – D 460mm – H 165mm Design Silvano Cremonesi EsseCidesign
Aluminum, Tempered Glass and Iron structure Custom shielded magnets able to support up to 50 Kg No screws on the surface Effective size W 550 x D 460 mm Design by Silvano Cremonesi
8 mm Tempered Glass 10 Custom shielded magnets able to support up to 30 Kg No screws on the surface Effective size W 430 x D 360 mm Design by Silvano Cremonesi
New!
• UP-OCC copper and silver conductors • Cross-section per pole: 5mm² • Double shielding • Non magnetic CNC aluminum proprietary shells • Oyaide 079 series Schuko and IEC plugs • Length: 2 meters
